MidNite Solar MNPV6-DISCO, 6 Position Disconnecting Combiner

MNPV6-DISCO MidNite Solar 6 Pos Lockable Disconnecting Combiner

The MNPV6 Disco is very flexible. It is ETL listed for AC and DC. This allows you to configure it for several different uses. It will work with 1-6 of our 150 volt DC breakers. The combiner also works with 1 of our 600 volt DC breakers for a grid tie disconnect. You can also install a 240 volt AC breaker with the 600 volt DC breaker to make a complete disconnect for a grid tie inverter. Load Break rated. 

Applications

• PV combiner up to six strings using MNEPV 150 VDC breakers with the MNPV6 Disco 
• PV combiner up to three strings using MNEPV 300 VDC breakers with the MNPV6-250 Disco 
• AC Combiner for up to three strings for use with micro inverters using MNEAC 240 VAC Breakers 
• DC load center using MNPV breakers 
   

Product Features

• Convenient disconnect handle
• All aluminum powder coated housing that won’t rust
• Flip up cover that can stay in the open position during installation
• PV Negative bus bar with 14 useable openings (10 #14-6 and 4#1/0-14)
• Chassis ground bus bar with 14 useable openings (10 #14-6 and 4#1/0-14)
• Standard din rail to mount up to 6, 150V or 3, 300 Volt breakers
• 120 Amp tin plated copper bus bar to combine breaker outputs - bus bar may be split in two
• Dead front cover snaps into place after wiring is complete for safety
• Knockouts for PV in and PV out on bottom and sides
• Top surface is available to bring conduit in from directly above the enclosure
• Warranty - 5 yrs.
• Listed by ETL for US & Canada

Webinars